Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAINTENANCE
! Before cleaning or maintenance cut the power.
! Failure to comply with the rules of cleaning of the
appliance and replacement of the filters entails the risk
of fire. Follow the suggested instructions.
Cleaning the hood
WHEN TO CLEAN IT: frequently both externally and
internally.
EXTERNAL CLEANING: use a cloth moistened in
lukewarm water and neutral detergent (for painted hoods);
use specific products for steel, copper or brass hoods.
INTERNAL CLEANING: use a cloth moistened in neutral
liquid detergent.
WHAT NOT TO DO: do not use alcohol or abrasive or
corrosive products (e.g. metal sponges, brushes
that are excessively hard, very aggressive detergents,
etc.)
Cleaning the grease filters
HOW TO REMOVE THE FILTERS: push handle down and
pull the filters towards the outside of the hood.
WHEN TO CLEAN IT: clean it at least every 2 months or
when the "filter alarm" system indicates the need.
HOW TO CLEAN THE FILTERS: hand wash or in the
dishwasher using a neutral detergent. If washing in the
dishwasher, possible discoloration of the filters does not
in any way compromise their functioning.
Replacing the charcoal filter (P)
WHEN TO REPLACE IT: at least every 6 months and in any
case on the basis of saturation of the same.
HOW TO REMOVE IT: remove the charcoal filters by first
removing the 4 brackets and 4 stop.
If the light spot is damaged, it must be replaced only by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
P
MALFUNCTIONS
If something appears not to be working properly, do the
following simple checks before calling Technical Service:
• If the hood is not working:
Check that:
- The power has not been disconnected.
- A speed has been selected.
• If the hood performs inefficiently:
Check that:
- The motor speed selected is sufficient for the amount of
smoke and vapours released.
- The kitchen is sufficiently ventilated to allow air intake.
- The charcoal filter is not saturated (hood in filtering
version).
• If the hood has turned off during normal functioning:
Check that:
- The power has not been disconnected.
- the omnipolar disconnection device has not tripped.
Advertenties
Inhoudsopgave
