Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
to be injured by the sharp blade tips.
Use a blade holder or wear gloves when handling a
saw blade.
Keep and store the blade in original packaging or other
suitable packaging, keep in dry conditions and away
from chemicals which may damage the blade.
LASER SAFETY RULES
The laser radiation used in this saw is Class 2 with
1mW and 650nm wavelengths. Do not
stare into the laser beam. Failure to comply with the
rules could result in serious personal injury.
Do not stare into beam during operation.
Do not project the laser beam directly into the eyes of
others. Serious eye injury could result.
Do not place the laser in a position that may cause
anyone to stare into the laser beam intentionally or
unintentionally.
Do not use optical tools to view the laser beam.
Do not operate the laser around children or allow
children to operate the laser.
Do not attempt to repair the laser device by yourself.
Do not attempt to change any parts of the laser device
by yourself.
Any repairs must only be carried out by the laser
manufacturer or authorized service agent.
Do not replace the laser with a different type.
RESIDUAL RISKS
Even when the machine is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
Risk of contact with uncovered parts of the rotating saw
blade.
Kick-back of work pieces and parts of work pieces due
to improper adjustment or handling.
Catapulting of faulty carbide tips from the saw blade.
Damage to respiratory system if effective dust mask is
not worn.
Damage to hearing if effective hearing protection is not
worn.
MAINTENANCE
Do not make any adjustments while the motor is in
motion.
Always make sure the machine's plug has been
removed from the mains power source before changing
brushes, lubricating or when doing any works or
maintenance on the machine.
After each use, check your machine for damage or
broken parts and keep it in top working condition by
repairing or replacing parts immediately.
The blade being hot after use, keep the alertness
during maintenance or cleaning procedures.
Clean out accumulated dust.
To assure safety and reliability, all repairs with the
exception of externally accessible brushes should be
performed by an authorised service centre.
Faults in the machine, including guards or saw blades,
should be reported as soon as they are discovered.
4
Original Instructions
If the power supply cord is damaged, it must be
replaced only by the manufacturer or by an authorized
service center to avoid risk. Contact authorized service
center.
SYMBOL
Safety alert
European Conformity Mark
British Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
Class II tool, double insulation
Please read the instructions carefully
before starting the product.
Wear ear protection
Always wear eye protection.
DANGER! Sharp blade.
Wear safety gloves
Blade rotation direction (shown on
saw blade)
Blade width of cut (Kerf)
Number of teeth on this saw blade
For cutting wood and analogous
material
Advertenties
Inhoudsopgave
