Advertenties
Note:
1. Repeat the procedure above each time you wish to rename.
2. D uring the setting, the mode will return to the previous stage if there is no input for 10 sec.
3. I f you want to clear the names on the Connect 236, press and hold "<" and ">" on the
Connect 236 for 5 seconds, and all the programmed names will be cleared.
4. You can also use the Remote Control for renaming.
Before setting the record function
Multi-function A/V switching is possible with 5 input terminals and 2 input/output terminals
enabling:
- locking function prevents switching over the device erroneously during recording.
- the recording of one signal on two different recorders at the same time.
- the recording of two different signals on two different recorders at the same time.
Recording Set Up.
1. C hannel 2 and Channel 3 are assigned for RECORD. Connect your record device to
Channel 2/3.
2. Y ou can define the name of your RECORD Device, refer to "Programming the input
channel" for how to assign the device name.
10
All manuals and user guides at all-guides.com
© MARMITEK
Advertenties
