Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Adjusting Top Plate Tension
Note: If top plate becomes loose/ stiff use an Allen key to adjust the tension.
Nisbets Essentials recommend the appliance is disconnected from the power supply and
allowed to cool before any adjustments are made.
1. Remove the screw fixing the back cover then remove the back cover.
2. Use an Allen key to adjust the tension of the top
plate. Turn clockwise to tighten, anticlockwise to
loosen.
3. Replace the back cover and tighten the screw.
Cleaning, Care & Maintenance
Warning:
Always turn off and disconnect the appliance from the power supply before cleaning.
Always allow the appliance to cool before cleaning.
If grease is permitted to accumulate, it will begin to carbonised into a hard substance that is extremely difficult
to remove. To prevent this follow the cleaning steps below:
•
Regularly remove excess grease or fat using a cloth dampened with hot soapy water.
•
Take care when using scrapers to remove cooking residues as they can damage the cooking surface.
•
Dry thoroughly after cleaning.
For best performance, Nisbets Essentials recommend that the appliance is cleaned after each day of
operation.
Failure to clean the appliance regularly may result in premature activation of the thermal cut-out switch.
6
DA396_ML_A5_v4_20241115.indb 6
DA396_ML_A5_v4_20241115.indb 6
2024/11/15 15:55
2024/11/15 15:55
Advertenties
Inhoudsopgave
