Advertenties
DE
Accessories
EN
•
Half fill the blender jug with warm water, add a few drops of washing-up liquid and
NL
let the device run for 30 seconds on the SMOOTHIE setting. Rinse the jug thoroughly
with lukewarm water and then dry it thoroughly.
SV
•
Alternatively, you can clean the accessories under running water using a small
ES
amount of washing-up liquid.
IT
5 Troubleshooting
PT
This chapter provides you with important notices with regard to operating the device.
TR
Observe the following notices to avoid dangers and damages:
HE
5.1 Safety notices
AR
ATTENTION
f
Repairs of electrical appliances must be carried out by qualified person who are
trained by the manufacturer.
f
Repairs performed by untrained persons may result in considerable hazards for the
user and damage the machine.
5.2 Troubleshooting table
If an error occurs, then an error code will appear on the control panel display. It describes the
reason for the error.
Problem
The device cannot be turned
on or started.
The device has switched off
automatically.
PLEASE NOTE
f
If you cannot solve the problem by carrying out the steps described above, our
Customer Service will help you free of charge.
f
Clean the device before you send it to customer service.
66
CASO PowerBlender B 2000
Possible cause
Mains plug not plugged in.
Der Mixbehälter steht nicht
korrekt auf der Motoreinheit
oder der Mixbehälter-Deckel
sitzt nicht richtig auf dem
Behälter
The overheating protection
has been triggered.
Solution
Plug in the mains plug.
Prüfen Sie den korrekten
Sitzt des Mixbehälter-De-
ckels und des Behälters auf
der Motoreinheit.
Remove the plug from the
socket and wait for approx.
30 mins before you use the
device again.
Advertenties
Hoofdstukken
