Inhoudsopgave
Advertenties
EN Operation instructions for Unimeter Digital
Thank you for choosing Unimeter Digital grain moisturemeter!
Read the whole manual before you use the meter!
1. Box content
- Unimeter Digital grain moisturemeter
- Carrying case
- Cleaning brush
- Operation instructions
- 9 V battery (installed)
2. Preparation
Insert the battery – Be careful to make sure its in the correct way !
Do not leave the battery in the meter outside of the season.
Use the < > buttons to navigate through the options
Use the < > button to find the battery power indicator
The different changeable options are;
Contrast
Language
The List of Grains/Seeds
To change;
•
Choose option using < >
•
Press Test
•
Change using < >
•
To save change press Test
Just for information;
Version
= Software Version
Temperature
= Sensor temperature in the meter
Battery Voltage
= It must be above 7,2Volts otherwise it will shut down.
Before testing any grains or seeds the Unimeter should be checked with your local
grain dealer. We at Unimeter take every care to ensure your meter has the latest and
most popular grain varieties included,
conditions can affect the measuring.
3. Adjusting the measurement for a grain/seed
1. Switch On
3. Press < >
At the same time !
5. Use < > to adjust either + or – values
4. Samples
•
Always take several samples and use their average as the result
•
Remove waste and green or abnormal grains.
•
Direct from the dryer;
▪
Give the grains time to cool a little before measuring.
= Display Contrast
= Change the Language
= See the chart later in the instructions
2. Choose grain/seed type
4. Offset is displayed
6. Press Test to save
BUT local varieties and growing
3
EN
Advertenties
Inhoudsopgave
