Inhoudsopgave
Advertenties
UK
Control Panel
Controller Display
Timed Chilling LED
Set-Temperature Chilling LED
Storage LED
In the "on" state, during normal operation, the display shows:
• the amount of time remaining for a timed blast chilling operation, if this is ongoing
• the temperature measured by the pin probe if a set-temperature chilling operation is ongoing
• the temperature of the cabinet, if storage is ongoing.
In "stand-by" mode, during normal operation, the display shows the temperature of the cabinet for ½ s every 3 s.
Signals
LED
Timed Chilling LED
Set-temperature chilling LED
Storage LED
All manuals and user guides at all-guides.com
Telephone Helpline: 0845 146 2887 (United Kingdom)
Alarm LED
If on and the LED
is off, a timed chilling operation is ongoing
If on and the LED
is also on, a post timed-chilling storage operation is ongoing
If flashing, a timed chilling and storage cycle will have been selected
If on and the LED
is off, a set-temperature chilling storage operation is ongoing
If on and the LED
is also on, a post set-temperature chilling storage operation
will be ongoing
If flashing, a set temperature chilling and storage cycle will have been selected
If it's on for ½ second every 3 seconds, the test to verify correct pin probe insertion
will be ongoing
If flashing and the LED
will have had a negative outcome and the cycle will have been started in timed mode
If flashing and the LED
outcome and so this will continue
If flashing and the LEDs
negative outcome, the device will have switched to storage mode and this will be
ongoing
If on, a storage operation will be ongoing
If flashing then the operational set point will be being modified while a storage
operation is ongoing
Minute LED
Message
is on, then the test to verify correct pin probe insertion
is on, the chilling stage will have had a negative
and
are on, the chilling stage will have had a
Degree Celsius LED
Degree Fahrenheit LED
Advertenties
Inhoudsopgave
