Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
IMPORTANT
Please read this manual carefully before use.
Do not open the machine when connected to the power
Do not use the machine when wet
Unplug the machine when you do not use it.
Do not cover the ventilation holes .
The metal cover can become hot when the machine is in use.
Keep away from children.
MANUAL
Before starting your laminating project it is wise to do a test lamination first. This is also good to get
familiar with the machine.
1. Put the laminator on a stable soil and plug the plug in a 220V socket
2. Turn on the machine with the ON/OFF switch
3. Press the switch for Hold or cold laminting on the position that you need for laminating.
4. Turn the knob indicating the thickness of your laminating pouch and wait until the machine indicates
it has reached the correct temperature for your selected thickness.
5. Put the document which you would like to laminate in the laminating pouch and entert he pouch into
the front entry. Note that you put the sealed side first.
If you put it in tot he machine with the wrong side you could damage the machine .
When you see that when the pouch is not entering the machine well you can put the switch on Back-
ward. And the laminating pouch will come back out.
6. The laminated document will come out oft he machine from the back side.
Let the laminating pouch cool off before storing it elsewhere.
7. When you are ready turn off the machine and pull the plug out oft he socket.
WARNING: When you have laminated a thick pouch on a high temperature and you would like to lami-
nate a thinner pouch after pleas enote that the machine needs to cool off before you can do the thinner
pouch.
THE BEST SETTINGS
For best results, use the following temperature settings.
2x75 microns - 125 degrees Celsius
2x125 microns - 145 degrees Celsius
2x250 microns - 195 degrees Celsius
Laminating pouches can have different combinations, so different temperatures are necessary. You can
be sure that if the laminating pouch is bulky, the temperature is too high.
If you want to laminating pouches of different thickness, start with a thinner pouch as it requires a lower
temperature. If you first laminate the thicker pouch and then the thinner one, the laminator first has to
cool down and this takes a few minutes. When the temperature decreases, the read lamp illuminates
solid green, although the desired temperature has not been reached.
www.pavo.eu
Advertenties
Inhoudsopgave
