Inhoudsopgave
Advertenties
Putting into operation
The lifetime of the battery can be negatively affected by frequent alarms, dirt,
All manuals and user guides at all-guides.com
large variations in the temperature or similar environmental influences.
After changing the battery, the low battery warning may continue for a further
10 minutes, due to the nature of the network. Check the functionality after testing
the battery.
Alarms and error signals
When the alarm threshold is exceeded, a loud alarm sounds.
• The alarm continues sounding as long as there is smoke in the detection chamber.
• The alarm is only switched off when there is no more smoke in the detection
chamber.
Maintenance and inspection
A smoke detector must always be at least once a year in accordance with DIN 14676
are checked for functionality. A functional test can be triggered by short activation
of the test button with this smoke alarm (5 in Figure 1). The LED flashes quickly and
it includes a test alarm. To networked detectors also includes a test alarm.
Cleaning
• Dusty detectors must be cleaned. You can clean dust from the air vents of the
detector using a vacuum cleaner or compressed air. If necessary, you can remove
the dust with a brush.
• When changing the battery, carefully clean the detection chamber in the wireless
smoke detector with a vacuum cleaner to remove any dust or dirt.
• You can clean the surface using a cloth slightly dampened in soapy water.
– 35 –
Cleaning and disposal
GB
Advertenties
Hoofdstukken
Inhoudsopgave
