Inhoudsopgave
Advertenties
U14318_PL-AC56_Kit_QSG_Booklet_105x170mm_V3.indb 4
LEDs and buttons
LED
2.4G /5G
Wi-Fi
Power-
line
Ethernet
Power
BUTTON
Clone
Press and hold the button for about one second to
start cloning the parent AP's SSID and password.
Pair
Press and hold the button for about one second to
start the pairing process.
Reset
Press and hold the button for about five seconds to
restore your device to the factory default settings.
4
STATUS
DESCRIPTION
Blinking
Your PL-AC56 is cloning the
rapidly
parent AP's SSID and password.
Blinking
Your PL-AC56 is resetting to the
every
factory default settings.
second
On
The device is connected to one
or more powerline devices.
Off
The device is not connected to
any powerline devices.
Blinking
In Power-Saving mode, the
powerline LED blinks every 15
seconds.
On/Off
A device is connected or not
connected to the Ethernet port.
Blinking
The powerline adapter is
transferring data via the
Ethernet port.
On/Off
Your device is on/off.
When switched on, the power
LED turns from red to green in
about one minute, indicating
that it is ready to use.
Blinking
Blinking every second: Pairing
is in progress.
DESCRIPTION
6/5/2018 4:11:57 PM
Advertenties
Inhoudsopgave
