Inhoudsopgave
Advertenties
■
Ensure before each use that all controls and safety
devices function correctly. Do not use the product if the
off switch does not stop the product.
■
Inspect the product before each use. Check for loose
fasteners. Make sure that all guards and handles
are properly and securely attached. Replace any
damaged parts before use. Check for battery pack
leaks.
■
Do not modify the product in any way.
■
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
■
Wear heavy, long trousers, boots, and gloves. Do not
wear loose-fitting clothing, short trousers, jewellery of
any kind, or use with bare feet.
■
Secure long hair so that it is above shoulder level to
prevent entanglement in moving parts.
■
The use of hearing protection reduces the ability to
hear warnings (shouts or alarms). The operator must
pay extra attention to what is going on in the working
area.
■
Operating similar tools nearby increases both the risk of
hearing injury and the potential for other persons to enter
your working area.
■
Do not use the product when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
■
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance and can result
in serious injury.
■
Do not touch moving parts. Keep all parts of your body
away from any moving part.
■
Turn off the product, remove the battery pack, and allow
both to cool down. Make sure that all moving parts have
come to a complete stop:
●
before leaving the product unattended
●
before cleaning or clearing a blockage
●
before adjusting the working position of the cutting
means
●
before
checking,
conducting
working on the product
●
before storing the product
■
If the product is dropped, suffers heavy impact, or begins
to vibrate abnormally, immediately stop the product and
inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by
an authorised service centre.
ADDITIONAL BATTERY SAFETY WARNINGS
■
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack, or charger in fluid or allow a fluid
to flow inside them. Corrosive or conductive fluids,
such as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can cause
a short circuit.
■
Charge the battery pack in a location where the ambient
temperature is between 10 °C and 38 °C.
■
Store the battery pack in a location where the ambient
temperature is between 0 °C and 40 °C.
■
Use the battery pack in a location where the ambient
temperature is between 0 °C and 40 °C.
TRANSPORTATION AND STORAGE
■
Turn off the product, remove the battery pack, and allow
both to cool down before storing or transporting.
■
Remove all foreign materials from the product. Store
the product in a cool, dry, and well-ventilated area
that is inaccessible to children. For extra safety, store
the battery pack separately from the product. Keep the
product away from corrosive agents such as garden
chemicals and de-icing salts. Do not store the product
outdoors.
■
For transportation, secure the product against movement
or falling to prevent injury to persons or damage to the
product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and
labelling when transporting batteries by a third party.
Ensure that no batteries can come in contact with other
batteries or conductive materials while in transport by
protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries
that are cracked or leaking. Check with the forwarding
company for further advice.
MAINTENANCE
■
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■
Servicing requires extreme care and knowledge
maintenance,
or
and should be performed only by a qualified service
technician. Have the product serviced by an authorised
service centre only.
■
The blades are extremely sharp. To prevent personal
injury, exercise extreme caution when cleaning,
lubricating, fitting, or removing the blade protector.
■
Remove the battery pack before adjusting, maintaining,
or cleaning the product.
■
You may make adjustments and repairs described in this
manual. For other repairs, have the product serviced by
an authorised service centre only.
■
After each use, clean the plastic parts with a soft, dry
cloth.
■
After each use, clean the debris from the blades
with a stiff brush, and then carefully apply a rust-
preventative lubricant before refitting the blade
protector. The manufacturer recommends using
5
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
Advertenties
Inhoudsopgave
