BEFORE THE FIRST USE
·
Put two AAA batteries in the remote control.
Set the time (see "use/use without remote control/plan: clock").
·
Prior to initial use, charge the robot vacuum cleaner for 5 hours (see "use/charging").
·
·
Place the signed brushes on the vacuum cleaner. Press on them until you hear a click. The brushes and
the machine are marked with L (left) and R (right); make sure they match.
INSTALLING THE CHARGING STATION
1.
Place the charging station on a smooth hard surface, e.g.
tiles, parquet, short-haired sturdy carpet, against a wall or
cupboard.
2.
Make sure that there is an area of at least 1 m free on the
left and right sides of the charging station. In front of the
charging station, there must be a free area of 2 m (Fig. 1).
If this is not the case, it is possible that the vacuum cleaner
cannot find the charger when it must charge.
3.
Take the adapter, put the plug in the outlet and put the DC
plug into the charging station (Fig. 2).
IMPORTANT: always make sure that no cables are in front of or
next to the charging station; these could get caught between
the wheels or brushes of the vacuum cleaner.
USE
Turn the machine on with the on switch on the side of the appliance prior to use or charging.
STANDBY/SLEEP MODE/OFF
Standby
The machine is in standby mode when the on switch is on and the machine is in idle state, ready to be
used immediately.
Sleep mode
When the machine is in sleep mode, you must first activate it before you can start the machine. This is
done by pressing the on/off touchscreen button on the machine or with the ON/OFF button on the remote
control.
The machine automatically goes into sleep mode after being in standby mode for 15 minutes. You can also
turn on the mode yourself by pressing and holding the on/off touchscreen button on the machine for 3
seconds.
Off
You can turn off the machine completely by switching off the on switch on the side of the device while in
standby mode.
The machine turns itself off after being in sleep mode for 15 minutes if no timer has been set.
36
DO7293S
Fig. 1
.
Fig. 2
10