Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.
Install the sewage tank, connect the suction pipe, and fill the clean water tank with a suitable detergent
solution.
4.
Familiarize yourself with the functions and purposes of each component and the control handle buttons
as shown in Figure 1.
5.
Secure the squeegee in place, ensuring it lies flat on the ground. Pull the angle adjustment handle to set it
at a comfortable height for the operator, then release it.
6.
Before starting the machine, grip the control handle firmly with both hands, ensuring no one is standing
near the machine to prevent potential injury if the scrubber moves suddenly. Activate the main switch,
suction motor, and drainage switch on the control handle panel; the indicator lights will illuminate, and
the machine will begin operating.
7.
Long press the suction switch button for 3 seconds to enter the ECO mode, which reduces noise and saves
energy.
Cleaning and maintenance
Basic instructions
1.
Although the machine is designed to be moisture-proof, under normal use, ensure that no water enters
the electrical components to prevent short circuits or electric shocks. Avoid allowing water or detergent
to contact the power plug or body circuits.
2.
Do not attempt to disassemble the machine by yourself. If the motor or circuit is faulty, contact us or an
authorized dealer for repairs.
3.
Do not use excessive force. Use the plastic handles, levers, and control buttons gently to prevent
unnecessary damage.
4.
After each use, drain the clean and sewage water tanks, and clean the sewage tank and pipelines to
prevent blockages.
5.
Clean the squeegee after each use and dry it with a soft cloth.
6.
If the machine is stored for an extended period, charge the battery regularly to maintain battery life.
Battery maintenance
1.
Avoid placing the battery in a completely enclosed area; it should be in a ventilated space.
2.
To extend battery life, recharge the battery promptly when it is low. Avoid storing the battery at a low or
zero charge for prolonged periods, as this can lead to damage.
3.
The allowable operating temperature range for the battery is -15°C to 50°C, with optimal lifespan
achieved at 20°C to 25°C.
4.
This is a maintenance-free sealed battery, requiring minimal upkeep. For batteries in a floating charge
system, it is recommended to log the system's floating charge voltage and ambient temperature monthly.
Record the floating charge voltage of each battery every six months, and, if there are significant
discrepancies, perform a yearly balanced charge. Additionally, conduct a capacity discharge test without
exceeding 50% of the rated capacity.
5.
Recharge discharged batteries as soon as possible, as delays may make recharging difficult. For batteries
in long-term storage, recharge at least once a year.
EN
B- Black wire
C- Red wire
Advertenties
Inhoudsopgave
