Advertenties
(GB) Instructions
VIVANCO UR 14 remote control for almost
all TV, audio, video and other infrared-
controllable appliances
Inserting the batteries
Open
the
battery
compartment
underside of the UR, see Fig.. Then insert 1
new CR 2032 lithium battery. Make sure that
the polarity is correct: the "+" and "-" markings
on the batteries and in the compartment must
match. To check functionality, press the PWR
button. If everything is correct the red lamp
flickers when the button is pressed.
Lithium Battery:
Caution: Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type recommended by the
manufacturer.
Dispose
of
according to the manufacturer's instructions.
Adapting to appliances
In order to control your appliances you must
adapt or set the remote control to them. There
are three ways of doing so: direct control code
entry, code search or learn.
Direct control code entry using the
enclosed list
Example: setting to control a Panasonic
television set:
1.
The
attached
list
example, the Panasonic Code 176.
Please make sure you have selected the
correct list for television sets (TV).
2.
To prepare code entry, press the
SET button, keep it pressed and then press the
required
appliance
button,
additionally
until
the
lamp
constantly.
3.
Then press the number buttons
(e.g. 1 7 6) in sequence.
4.
Once the numbers have been
entered the lamp goes out and the remote
control is ready to control your appliance.
5.
Finally, test the control code setting
by trying to control (in this example) your
television set. If it does not work at all or not
correctly try a different code from the list or the
code search (see below).
To set the remote control for other
6.
appliances, proceed in the same way. Instead
of the TV appliance button, press another
button e.g. VCR, DVB (SAT, DECODER),
DVD).
The letters on the device buttons TV1/TV2*),
CD/AUX1*),
DVB1/DVB2*)
TV3/TUNER*), CBL, AMP, DVD1/DVD2*) are
Vivanco GmbH, D-22926 Ahrensburg, E-Mail
UR 14 UNIVERSAL CONTROLLER
for your orientation only. You can set each type
of device under any of the buttons.
*): All *) marked device keys can be assigned
twice so that 14 different devices can be
controlled altogether. If you press a key once
on
the
according to these instructions, you can enter a
device code for the first assignment or control
the first device. If you press a device key twice
within 0,5 seconds you can set the key for a
second device, or control a second device by
the key.
You can terminate the mode by pressing any
device button.
Code search
If the brand of your appliance is not in the list
or none of the codes given fits, we recommend
used
batteries
a code search.
Manual code search
1.
controlled. Program is running.
2.
SET button, keep it pressed and then press the
required
additionally
constantly.
3.
appliance to be controlled.
4.
gives,
for
The lamp (LED) blinks. – Except when
searching for a TV code you can also briefly
press the
function to help search and press ON/OFF
for testing the next code. Make sure that a
tape, a DVD or a CD is inserted in the tape
e.g.
TV1*),
deck, player or recorder.
(LED)
lights
5.
on/off) button repeatedly for testing the next
code, approx. every 1,5 seconds, until the
appliance, e.g. your TV reacts by power off or
your DVD player, reacts by Play > button. - If
your appliance has switched itself off you must
switch it back on again, e.g. on the appliance
or with the original remote control, to continue
searching. - When your appliance reacts you
can
also try out other buttons
interrupting the search. If some buttons do not
work properly, simply continue searching with
ON/OFF or Play.
6.
correctly, press the appliance button, e.g.
TV1*), and end the search. The lamp (LED)
goes out.
- The UR 14 continues with the search at the
SAT1/SAT2*),
point where you interrupted it. . The code last
:
hotline@vivanco.de
Switch on the appliance to be
To prepare code search, press the
appliance
button,
e.g.
until
the
lamp
(LED)
Then point the remote control at the
Briefly press the SET button once.
(Play) button and use the Play
Press the ON/OFF
(appliance
When
your
appliance
, Helpline: +49 (0) 4102 231135
TV1*),
lights
without
reacts
2
Advertenties
