Inhoudsopgave
Advertenties
This product features an "EL" panel (Electro Luminescence technology) which is
activated by touching screen and remote simultaneously and/or by keypress. In
order to save battery life, the "EL" screen will stay illuminated for 8 seconds
during normal use. If you want you can change the "EL" Screen activation
setting from activation by touching screen and remote simultaneously to activa-
tion by keypress. If you want you can also change the "EL" On time setting. It
is also possible to adjust the "EL" Screen brightness-settings on the
KAMELEON 10 "EL" panel. One of the key features of the KAMELEON 10 is the
"EL" display, which changes to suit the device you are controlling. The overview
on page 6 will show you all the possible functionkeys.
"EL" Screen activation setting
The KAMELEON 10 features an "EL" panel which is activated by touching screen
and remote simultaneously or by keypress.
It is possible to lock the KAMELEON 10 to one activation setting:
1.
2.
3.
-> If the animated IR Indicator blinks twice the "EL" panel will be activated only
by touching screen and remote simultaneously.
-> If the animated IR Indicator blinks four times the "EL" panel will be activated
only by keypress.
Simply perform these steps to lock the KAMELEON 10 to the activation
setting that you prefer.
Light sensor
To conserve battery life, your KAMELEON 10 remote is fitted with a light sensor,
which adjusts the brightness of the display to suit its environment. For example, it is
not necessary to have the display at full brightness in a darkened room, so the
remote dims the display somewhat.
If you do not require this function, it can be disabled. To do this:
1.
2.
3.
To re-enable it, repeat the above steps and the IR Indicator will blink twice.
4
The Keypad
= MAGIC (hat) key
=
The IR Indicator that will light up during
programming
Press and hold the MAGIC key until the rabbit
comes out of the hat (the screen will change to
the setup screen).
Press OTHER.
Now press 9 8 9. The IR Indicator will blink twice (or 4 times).
Press and hold down the Magic key (for about
3 seconds) until the rabbit comes out of the hat
(the screen will change to the setup screen).
Press OTHER.
Press 9 9 9. The IR Indicator will blink four times and the light
sensor is now disabled.
WWW.ONEFORALL.COM
Advertenties
Hoofdstukken
Inhoudsopgave
