Inhoudsopgave
Advertenties
OPERATING INSTRUCTIONS
Automatic Worldwide Dual Voltage
This appliance will automatically adjust to the proper voltage.
Dual Plate Straightener
Includes (4) floating plates that delivers a smooth glide for faster, straighter results. Fewer
Passes. Less Damage.
Automatic Shut-Off
This appliance has an Automatic Shut-Off feature. Should you forget to turn off the iron, it
will automatically shut off after 1 hour.
Plate-locking Switch
For easier storage, the plates of the straightener can be locked together. To engage the
locking switch, first turn the appliance off and unplug it. Push the switch up while pressing
the handles together to lock the plates. To unlock, press the handles together and push the
unlock switch down.
WARNING: DO NOT engage the plate-locking switch during styling, and DO NOT lock the
plates onto hair, as serious damage to hair or even injury could result.
Start-up
• Plug the straightener into an electrical outlet
• Press the Power Button (On/Off) and the LED Temperature Display will start blinking
showing the default setting or the last memory setting.
Adjusting Plate Temperatures:
• Both Left (L) and Right (R) plates, which are labeled for easy reference, can be set at the
same temperatures or adjusted to have one side hotter or cooler than the other.
• Slide the Dual Heater Control Switch to the "L" to set the temperature on the Left plates.
• Slide switch to the "R" to set the temperature on the Right Plates. To set both plates at
the same temperature, move switch to the "LR" position.
Caution: Straighteners with heat controls operate at high temperatures when used on
high settings. When using for the first time, begin with the LOWEST setting. Please read
all instructions carefully before using. For best results, follow these guidelines:
Heat Selection Hair Type
100 °C - 165 °C
For fine, thin hair
165 °C - 193 °C
For normal, medium-textured hair
195 °C - 235 °C
For wavy, thick, coarse hair
Helpful Styling Hints
• Hair should be clean and dried completely before using any styling tool.
• Separate a 2.5 cm section of hair, gently place hair between the Straightening plates
and clamp the straightener down firmly on the hair. You will achieve professional results
if you work from the scalp to the ends of your hair.
• Carefully slide the iron along the isolated section, making sure the hair is heated and
straightened all the way to the ends. The ends will probably require less heat than the
hair which grows closer to the scalp.
• For best results, hold end of hair while smoothing the hair section.
• To create flips or curls, use rounded edge of Straightening Plates to curl ends out or
under.
• To remove hair from the flat iron, release pressure and allow the hair to gently slip out
from the Straightening Plates.
• The straightening process does not require overlapping; separate each section of hair
and work on it as indicated above.
• Allow hair to cool before combing or brushing.
• Repeat the process until you have achieved the look you desire.
• When styling is complete, press and hold the Power Button (ON/OFF) to turn off.
Unplug the appliance and allow it to cool before storing.
4
USER MAINTENANCE INSTRUCTIONS
Maintenance
Your appliance is virtually maintenance-free. No lubrication is needed. Keep heated
surfaces clean and free of dust, dirt, and hair spray. If cleaning becomes necessary, unplug
the appliance from the power source and wipe the exterior with a damp cloth. If the cord
becomes twisted, untwist prior to use.
WARNING: If any malfunction occurs, do not attempt to repair. This appliance has no user-
serviceable parts.
Storage
Unplug when not in use.
Allow appliance to cool and store out of reach of children in a safe, dry location.
Features:
A. Cool Tip
B. Straightening Plates
C. LED Digital Display
D. Dual Heater Control Switch
E. Temperature Select Buttons
F. Power Button
G. Locking Switch
H. Swivel Cord
Guarantee and Service
Your Hot Tools appliance is guaranteed against defects under normal use for 2 years from
the original date of purchase. If your product does not perform satisfactorily because of
defects in materials or manufacture, within the warranty period, it will be replaced. Please
retain your till receipt or other proof of purchase for all claims within the warranty period.
The guarantee becomes void if the proof of purchase is not presented. Simply take the
appliance back to the retailer from where purchased, along with a valid till receipt, for
exchange free of charge. This guarantee does not cover defects which have occurred due
to misuse, abuse or are caused by failure to follow the instructions contained within this
manual.
UK only: This does not affect your consumer statutory rights.
The manufacturing date is given by the 4 digit Batch Number marked on the rear of the
product. The first 2 digits represent the week of manufacture, and the last 2 digits represent
the year of manufacture. Example: 3420 - product manufactured week 34 of the year 2020.
The appearance of this appliance may differ from the illustration.
This appliance complies with EU legislation 2012/19/EU on end of life recycling.
Products showing the 'Crossed Through' wheeled bin symbol on either the rating
label, gift box or instructions must be recycled separately from household waste at
the end of their useful life.
Please DO NOT dispose of appliance in normal household waste.
Your local appliance retailer may operate a 'take-back' scheme when you are ready to
purchase a replacement product, alternatively contact your local government authority for
further help and advice on where to take your appliance for recycling.
This product carries the CE mark and is manufactured in conformity with the
Electromagnetic Directive 2014/30/EU, the Low Voltage Directive 2014/35/EU, the ROHS
Directive 2011/65/EU and the ERP Directive 2009/125/EC.
Product Support: +44 (0) 207 949 0115
5
Advertenties
Inhoudsopgave
