Inhoudsopgave
Advertenties
All manuals and user guides at all-guides.com
11. Troubleshooting guide
Fault
Motor does not start
a) Internal terminals disconnected
b) Safety lock-off defective
c) Scarifi er housing clogged
d) Safety plug is not connected
e) Battery is not correctly inserted
Engine performance
a) Soil is too fi rm
drops
b) Housing clogged
c) Roller badly worn
Imprecise scarifying
a) roller worn
result
b) Wrong working depth
Motor is running,
a) Toothed belt is torn
roller is not
rotating
Important notice! To protect the motor itis equipped with a thermal overload switch which cuts
out when overloaded and starts again automatically after a short cooling-down period.
Anl_GAV_E 40_Li_OA_SPK7.indb 28
Anl_GAV_E 40_Li_OA_SPK7.indb 28
GB
Possible causes
a) By customer service workshop
b) By customer service workshop
c) Change the scarifying depth if
d) Connect safety plug (see 6.)
e) Remove battery and insert again
a) Change working depth
b) Clean housing
c) Replace roller
a) Replace roller
b) Correct working depth
a) By customer service workshop
- 28 -
Rectifi cation
necessary; clean the housing so
that the spike drum can move freely
(see 5.)
16.09.2016 08:57:02
16.09.2016 08:57:02
Advertenties
Inhoudsopgave
