Inhoudsopgave
Advertenties
HV-111712
PARTS DESCRIPTION
1. Main unit
2. Dust cup
3. Extension tube
4. Floor brush
5. Textile nozzle
6. Crevice nozzle
7. Round brush
8. On/off button
9. Handle
10. Dust cup release button
11. Connection tube release button
12. Connection tube
13. Suction hole opening
14. Locking clip
USE
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories.
1. Insert the connection tube into the suction hole opening; make sure it fits firmly. You can also press and
hold the connection tube release button to remove it from the suction hole opening.
2. Connect different nozzle tools / brushes onto the connection tube for different cleaning purposes.
When connect the floor brush, please connect the extension tube first. The floor brush has two positions,
one for hard and one for soft/textile surfaces – Choose the right one.
3. Plug in the appliance.
4. Press the on/off button to turn on the appliance. Press it again, the unit will be turned off.
NOTE: During use, please pay attention to the dust capacity and do not exceed the "MAX" level indicated on
the dust cup. This appliance is for dry suction only.
Caution: The suction hole opening must be open and free of any obstructions at all times. Otherwise, the
motor will overheat and could become damaged.
- 5 -
EN
Advertenties
Inhoudsopgave
