Inhoudsopgave
Advertenties
louver is 6
for each press. When the louver swings at a certain angle which would affect the cooling and
o
heating effect of the air conditioner, it would automatically change the swing direction. No symbol will
appear in the display area when press this button.
Timer on Button: Press this button to initiate the auto-on time sequence. Each press will increase the
i
auto-timed setting in 30 minutes increments. When the setting time displays 10Hr, each press will increase
the auto-timed setting 60 minutes increments. To cancel the auto-timed program, continue pressing the
button until 0.0 is displayed.
Timer off Button: Press this button to initiate the auto-off time sequence. Each press will increase the
j
auto-timed setting in 30 minutes increments. When the setting time displays 10Hr, each press will increase
the auto-timed setting 60 minutes increments. To cancel the auto-timed program, continue pressing the
button until 0.0 is displayed.
RESET Button: When you press the recessed RESET button, all current settings are cancelled and the con-
k
trol will return to the initial settings.
Indoor Freezing prevention / Turbo Button: Push this button on COOL mode, the air conditioner goes into
l
powerful cooling operation. Push again to cancel the TURBO function. Upon pressing this button (> 2 sec-
onds) the unit will go into the freezing prevention mode. The unit will overrule the indoor temperature
setting and will set it to approx 8 °C. In this way preventing your home from freezing during cold periods
at the lowest possible energy consumption. When this mode is selected the indoor unit display will show
"FP". This button can only be operated in heating mode. To leave the Home Freezing Prevention Mode:
simply press the button once again.
LOCK Button: When you press the recessed LOCK button, all current settings are locked in and the remote
m
controller does not accept any operation except that of the LOCK. Press again to cancel the LOCK mode.
LED DISPLAY Button: Press this button to clear the digit display in the air conditioner. The digit display in
n
the air conditioner will reactivate itself automatically after 3 seconds, when no buttons are being pressed
in this period. Press it again to activate it (Not applicable to units without this function).
Memory Button: Used to restore the manufacturing default setting or to resume a memorised setting.
o
- when the remote control is not yet programmed by the user the manufacturer default memory is "auto"
mode at 24°C with "auto" fan speed. Upon pressing the memory button the unit will change its setting
to "auto" mode at 24°C with "auto" fan speed
- after the user has changed the setting to his choice (for example heating, low fan and 25°C) this user
setting can be placed in the memory of the Remote control by pressing the memory button by more than
2 seconds.
- when the indoor unit is in any random setting, pressing the memory button for less than 2 seconds will
have the result that the indoor unit will move to the setting as programmed in the remote control mem-
ory
Names and Functions of indicators on Remote Controller
auto cool dry heat
fan
SET TEMP. TIMER ONOFF
sleep
lock
run
4
52
52
All manuals and user guides at all-guides.com
2
1
3
4
7
6
5
fig. 2
Advertenties
Hoofdstukken
Inhoudsopgave
