Inhoudsopgave
Advertenties
pro.Bose.com
Hardware Installation
Rack Mounting the Chassis
The chassis requires one 1.75" (44 mm) rack space unit (1RU) in a standard 18" (457 mm) deep rack. To secure the chassis to the rack,
use four screws with washers (not provided) to prevent marring the front panel.
Tip: Use of neoprene rubber washers are a good choice because they grip the screw head and prevent the screws from backing out
from vibration or during transportation.
Spacing
When mounting adjacent to heat generating products such as power amplifiers, allow a 1RU open space between the SP-24 sound
processor and the amplifier to allow for air flow.
Connections
Audio Connections
The ControlSpace
SP-24 sound processor has two balanced
®
XLR analog inputs and four balanced XLR analog outputs
for connection with a variety of professional-level audio
equipment.
SP-24
Amplifier
English
All manuals and user guides at all-guides.com
Power Connection
The ControlSpace SP-24 sound processor uses a universal power
supply for worldwide use. AC power connection is made using
the included power cord. Insert the proper power cord for the
voltage used in your region.
Installation and Operating Guide
A digital device, pursuant to Part 15
gainst harmful interference when
rates, uses, and can radiate radio
on manual, may cause harmful
ntial area is likely to cause harmful
at his own expense.
SP-24
Installation and Operating Guide
Page 23
Advertenties
Inhoudsopgave
