Inhoudsopgave
Advertenties
MAINTENANCE
• Make sure that the appliance is off and unplug before performing any work.
• Do not immerse the appliance in water or in any other liquid.
• Do not use corrosive, abrasive or flammable products to clean the appliance.
CLEANING THE REMOVABLE FILTER: The removable filter captures dust and extends the appliance
efficiency. It is recommended to clean it every month. Pull the handle of the removable filter,
clean it with warm water and a soft brush then dry it and reposition it.
Be careful not to dry the filter in direct sunlight or near a strong heat source.
CLEANING THE APPLIANCE: Use a soft cloth to remove dust at the air inlets and outlets.
CLEANING THE TANK: Remove the tank and unclip the lid. To avoid calc deposit, clean the tank
at least once a month with an appropriate product or with white vinegar.
STORAGE OF THE APPLIANCE: To avoid any bacteria or virus proliferation, never store the
appliance with water inside the tank and be sure that the appliance is perfectly dry.
1. Empty and clean the tank.
2. Clean the air inlets and outlets as well as the removable filter.
3. Once the different parts have dried properly, store the product in a place that is protected
against dust and that is clean, dry and ventilated.
NONE INCLUDED ACCESSORY
To remove the water on a raise evacuation
you can add the air&me lift pump. Pump
it up could remove 450L/h on a height of
3 meters. With its small size, it could be easily
placed into the tank.
PUMP IT UP
www.airandme.fr
14
All manuals and user guides at all-guides.com
FAQ
Situation
The product
don't work
Decrease in
performance
of the product
(less water in
the tank)
Significant noise
Reason
Solution
> The socket is not correctly
pluged. Is there a power
> Plug correctly the socket with
outage.
the right voltage.
Avoid multi-taps.
> The home leakage switch
or fuse cut off.
> The water tank is full.
> Emplty the tank.
> The water tank is not
> Push the tank in its right position.
correctly placed.
> The pre-filter is dirty so that it
> Clear the pre-filter.
blocks the airflow.
> Leave at least 30 cm of space
> The air inlet/outlet of the
on the back and sides of the
machine is blocked by
product, and at least 50 cm of
something.
space above the product.
> Under 15°C the product is in
defrost function. The product
> The temperature is too low.
could not works with its optimal
capacity.
> The humidity level is already
low.
> There is anything stuck on
> Make sure that any objects could
the fan in the air outlet.
damage the fan.
> The machine have a
> Call your dealer for an after sale
fonctionning problem.
service.
15
Advertenties
Inhoudsopgave
