Download Inhoudsopgave Inhoud Print deze pagina

Cleaning And Maintenance; Cleaning; General Maintenance; Replacing The Cutting Insert - Grizzly ART 1825 Lion Vertaling Van De Originele Gebruiksaanwijzing

Inhoudsopgave

Advertenties

GB

Cleaning and maintenance

Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before do-
ing any servicing, remove the battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance with
water and do not immerse it in
water. Electric shock hazard!
Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or sol-
vents. You may otherwise irreparably
damage the appliance.
After every trimming session, remove
grass and soil from the protective
cover and the trimming assembly.
To thoroughly clean the trimming as-
sembly, remove the cutting insert
(
13) (see "Replacing the cutting
insert") and use a sharp knife to clean
the pin (
24).

General maintenance

Prior to every use, check the appliance
for obvious defects such as loose,
worn or damaged parts. Check that the
screws in the cutting disk are tight.
Check covers and safety devices for
damages and correct installation. Re-
place as necessary.
26
All manuals and user guides at all-guides.com

Replacing the cutting insert

1. Slide the cutting insert (13) in-
ward and push it out of the pin
(24) on the cutting disk (12).
2. Place the new cutting insert (13)
on the pin (24) and pull out the
insert until it snaps in.

Storage

Store the trimmer in a dry place well
out of reach of children.
Do not stand the trimmer on its pro-
tective cover. Suspend it by its upper
handle in such a manner that the
protective cover does not come into
contact with other objects. This is be-
cause the protective cover could be-
come deformed, thereby changing its
dimensions and its safety properties.
Before a longer period of storage (e.g.
over winter), remove the battery from
the equipment.
Only keep the batteries partly char-
ged. The charge condition should be
40-60% during a longer storage peri-
od.
During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every 3
months
Store the equipment between 10°C
and 25°C. Avoid extremes of cold
and heat during storage, in order to
prevent impairment of battery perfor-
mance.
In order to keep the battery well
charged, avoid exposing the appliance
to extreme heat or cold in storage.

Advertenties

Inhoudsopgave
loading

Inhoudsopgave