Cleaning and Maintenance
NOTE!
RISK OF DAMAGE!
Improper handling of the handheld vacuum cleaner can result in damage to the vacuum cleaner itself.
Never immerse the handheld vacuum cleaner in water to clean and do not clean with a steam cleaner.
Ensure that no liquids get inside the cleaning unit.
Ensure that all parts, especially the filters, are completely dry before reassembling the handheld
vacuum cleaner after cleaning.
Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic
cleaning tools such as knives, hard spatulas and the like. These may damage the surface.
Clean all parts of the handheld vacuum cleaner regularly to avoid blockages and to guarantee the
functional capacity of the handheld vacuum cleaner.
Emptying the dust container
NOTE!
Empty the dust container after every use to avoid blockages and to maintain the functionality of the
hand-held vacuum cleaner.
1. Switch the handheld vacuum cleaner off.
2. Loosen the container by turning it anticlockwise.
3. Remove the HEPA filter and remove the dirt residues from the dust container.
4. Tap out the HEPA filter. If it is very dirty, the HEPA filter can be cleaned under running water. Allow the filter to
dry completely before reinserting it.
5. Place the filter in the dust container and turn the container back onto the main unit.
Replace the HEPA filter at intervals of approx. 6 months.
Cleaning
1. Wipe the dust container with a damp cloth.
2. Clean the HEPA filter with a soft brush or tap it to clear it.
3. If required, the HEPA filter can be rinsed under running water.
4. Wipe the outside of the hand-held vacuum cleaner with a dry cloth.
5. Leave all the parts to dry fully before reassembling the hand-held vacuum cleaner after cleaning.
6. Reinsert the HEPA filter in the dust container.
7. Insert the dust container back in the device until you hear a click.
Instruction manual
GB
21