Advertenties
2. Insert the new line knife and screw it on again.
Do not overtighten the screws.
Sharpening the line knife
1. Remove the cutting blade from the guard plate.
2. Secure the line knife in a vice and sharpen it
with a flat file.
Only file in one direction!
Cleaning
Clean the machine carefully after each use
in order to keep it functioning correctly.
Regularly clean all moving parts.
„
Clean the housing with a soft brush or a dry
„
cloth.
Do not clean the machine with running water or
„
high-pressure washers.
Do not use solvents (petrol, alcohol, etc.) for the
„
plastic parts, since these can damage the plastic
parts.
Keep the handle grips free from oil and grease.
„
Water, solvents and polishes are not allowed to
be used.
Storage
Clean the machine and its accessories after
„
each use.
Hang up the electric brushcutter by its hand-
le. This avoids placing unnecessary load on
the cutter head.
Store the machine in a dry place protected
„
against frost.
Disposal
Do not dispose of worn-out
machines in domestic waste!
The packaging, machine and accessories are made
from recyclable materials and must be disposed of
accordingly.
Technical data
Article no. 112 923
Technical data acc. to the following standards:
Mechanical safety acc. to EN 786, 5.1.1, Annex
440102 _c
E and D, sound pressure and sound energy level
acc. to DIN EN ISO 3744:2010,
measurement of mechanical vibration at the hand
grip acc. to EN 28662-1:1992.
The specified values have been established
based on a standardised test process and
can be used for comparing different electrical
tools with one another.
In addition, these values are suitable for
estimating in advance the loads to which the
user is exposed due to vibration.
Important!
The actual vibration values may differ from
those specified, depending on what the
electrical tool is used for.
Take measures to protect yourself against
vibration loads. In doing so, take account of
the entire working process, i.e. also times
during which the electrical tool is operating
without load, or is switched off.
Suitable measures include regular main-
tenance and care of the electrical tool and
the tool attachments, keeping your hands
warm, taking regular breaks and planning the
working sequences effectively.
1000W
230 V AC / 50 Hz
4,3 m/s² (K = 1.5 m/s²)
LpA 80,1 dB(A) K = 2,5 dB(A)
96 dB(A)
Guaranteed: 96 dB(A) Measured: 94 dB(A)
35 cm
4,7 kg
EN
19
Advertenties
Hoofdstukken
