Description of the user menu
EN
Access to the menu using the "STOP" and "START" keys.
The device will ask for the password, set to "0" by the manufacturer, but with the possibility of changing the
password in the menu.
If set to "0", the item "L.1" is automatically displayed - temperature of the 1st program.
Press the up arrow (little "pizza") to display the item "t. 1" (time of the 1st program). The up arrow moves to
the following articles and the down arrow (STOP) to the previous articles. The "START" key is used to access
the edition of the set. Values increase by pressing the up arrow and decrease by pressing the down arrow.
The "large PIZZA" button allows you to switch to a higher level (the number flashes).
By reaching the highest speed and pressing the button again, you activate the decimal point (flashing) which
you can move using the arrows.
By pressing the "large PIZZA" button again, you return to minimum speed.
To save the modified value, you must press the "START" button. Otherwise, press the "PRH" key.
To exit the menu, press the "PRH" key again. This is also possible by reaching the end of the menu using
the arrows.
Menu
L.1 - Temperature 1st program
t.1 - 1st program time
rp - Repetition interval of the signaling of the end of programs 1 – 4
L.2 - 2nd program temperature
t.2 - 2nd program time
L.3 - 3rd program temperature
t.3 - 3rd program time
L.4 - 4th program temperature
t.4 - 4th program time
Lt - Preheating program temperature
rt - Repetition interval of the signaling of the end of the preheating
program
n.PA. - Enter password
REMARK
The appliance is equipped with a safety system in case of overheating. In the event of tripping, unplug the
appliance and allow it to cool. If this protection system activates regularly, it is essential to contact your
retailer.
After automatic shutdown, the device can only be put into operation by pressing the Reset button on the back
of the device. To do this, wait for the temperature to drop, press the Reset button.