9. To reduce the suction power, move the suction power switch upwards: the larger the opening is; the weaker
the suction power is.
10. After use, turn off the appliance by pressing the on/off button to the position "O".
Note: Other electrical tools can be plugged into the electrical outlet on the top cover, and when the vacuum
cleaner has been connected to the power outlet, this electrical tool can work with the electricity too.
CLEANING AND MAINTENANCE
Warning: Always switch off and unplug the appliance from electrical outlet before dissembling and cleaning.
1. Release the top cover latch and take off the top cover.
2. Take out the cloth filter. Empty the tank.
3. Clean the cloth filter by water when necessary. Dry it completely but never expose it in a direct sunlight.
4. Take off the sponge filter and clean it by water. Dry it completely but never expose it in a direct sunlight too.
5. Assemble back the appliance.
Note:
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat
and could become damaged.
All filters should be checked regularly for signs of damage, preferably after each task. The filters must be
replaced immediately if they become damaged. Always disconnect the vacuum cleaner from the electrical
outlet when checking the filters.
Clean the appliance after each use. When the tank is full, the appliance will lose the vacuum power and
cannot blow either.
Parking:
This appliance can be parked as below style to save your room space.
TECHNICAL DATA
Voltage: 220-240V ~ 50/60Hz
Power: 2200W
- 5 -