Inhoudsopgave
Advertenties
22046
PARTS AND ACCESSORIES
On/off switch
1.
Electrical outlet
2.
Handle
3.
Power cord hook
4.
Blower port
5.
Top cover
6.
Suction port
7.
Hose
8.
Caster supports (x4)
9.
10. Top cover latch
11. Suction power switch
12. Upper extension tube
13. Lower extension tube
14. Combi nozzle
15. Tank
16. Curved hose
17. Floor brush
18. Cloth filter
19. Sponge filter
OPERATION
Caution:
Always remove the power plug from the wall outlet before assembling or removing accessories.
1. Before use, put the tank upside down. Align the caster supports at their positions, using the provided screws
to tighten the caster supports.
2. The appliance has both suction function and blower function. To use the suction function, fit the hose into
the suction port (position ①) by aligning the bulge and groove and turning it clockwise; to use the blower
function, fit the hose into the blower port (position ②) by aligning the bulge and groove and turning it
clockwise.
3. Attach the extension tube(s) to the curved hose.
4. Fit the floor brush or combi nozzle to the other end of the extension tube.
5. For wet pick-up, please open the top cover and take out the cloth filter first.
6. Check and make sure the drain port has its cover in place properly.
7. Unwind the power cord and insert the power plug into an appropriate power outlet.
8. Press the on/off button to the position "—" turn on the appliance.
- 4 -
EN
Advertenties
Inhoudsopgave
