Inhoudsopgave
Advertenties
3.3
Intended use
The DCEX 125/ 5" M slitting hood is for cutting and slitting mineral materials, particularly masonry, with
125 mm / 5" wheels in combination with a Hilti dust extractor. Use of the DCEX 125/ 5" M slitting hood
is permitted only with the angle grinders for which this slitting hood is recommended in your operating
instructions. Use of the DCEX 125/ 5" M slitting hood is permitted only when water is not used.
3.4
Items supplied
Slitting hood
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4
Technical data
4.1
Technical data
Weight
Disc diameter
Slitting width with twin discs
Maximum cutting depth
4.2
Diamond cutting discs
Application
Designation
Material
5
Before use
5.1
Fitting the hood
1. Fit the guard on to the arbor collar so that the two triangular marks on the guard and on the power tool
are in alignment.
2. To bring the hood to the desired working position, pivot the device radially while pressing the catch on
the angle grinder.
▶ The catch engages with an audible click.
5.2
Opening hood
4
1. Press the catch.
2. Open the front clip.
3. Press the locking catch.
4. Open the hood.
5.3
Fitting the diamond cutting disc for slitting applications
The use of Kwick-Lock nuts for this application is not permitted.
For this application you need the slitting adapter set, which is additionally available.
1. Remove the clamping flange for the arbor.
2. Screw the adapter on to the arbor and tighten it securely.
3. Insert a diamond cutting disc, observing the specified direction of rotation.
4. Fit the spacer rings for the desired width between slits.
5. Insert a diamond cutting disc, observing the specified direction of rotation.
6. Screw on the clamping nut and tighten it securely with the pin wrench.
8
English
3
Diamond cutting disc
Cutting, slitting
DCD
Mineral
8
267722
DC-EX 125/5"M
1.35 kg
125 mm
25 mm
28 mm
*267722*
Advertenties
Inhoudsopgave
