Inhoudsopgave
Advertenties
Installation
•
buffer tank is designed for vertical mounting only (screw feet),
•
buffer tank can be installed in the following central heating systems:
-
open system, in accordance with legally binding requirements,
-
closed system, in accordance with legally binding requirements,
•
buffer tank must be mounted in the place and in such a way to avoid room flooding
caused be leaking tank or connectors.
Start -up
Before commissioning the buffer tank, visually inspect the device to ensure correct
connection. Check the tightness of the connections. Verify the operation of the safety
valve (according to the valve manufacturer's instructions).
The device can be additionally equipped with an electric heater with a thermostat (GRW-
1.4/230V, GRW-2.0/230V, GRW-3.0/230V, GRW-4.5/400V). The maximum length of the
heater is 380mm.
PL;DE;DK;EN;ES;FI;FR;NL;NO;SE;SI-120_f.1979
470 mm
185 mm
EN
103 mm
110 mm
A
31
Advertenties
Hoofdstukken
Inhoudsopgave
