CLEANING AND MAINTENANCE - Cleaning the housing
1. Do not clean the vacuum cleaner during charging. Remove the adapter from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
WARNING:
•
Never immerse the appliance, plug or power cord in water.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
CLEANING AND MAINTENANCE - Cleaning the turbo nozzle
1. Remove the turbo nozzle from the vacuum cleaner. Push the button (1) at the top of the tube connection
and pull the turbo nozzle out.
2. Unlock the locking plate at the bottom of the turbo nozzle housing by sliding the slider outwards (see
figure 6).
3. Remove the rotating brush
from the turbo nozzle (Figure
6) and clean the rotating brush.
4. Put the rotating brush back into
the turbo nozzle.
5. Mount the locking plate and
lock it by sliding the slider
inwards.
CLEANING AND MAINTENANCE - Cleaning or replacing the filter
For best results clean or replace the filter after every second or third use of the vacuum cleaner, or more
frequently if the filter is visibly blocked.
WARNING:
•
Clean the filter regularly to avoid that the filter becomes clogged and the engine overheated.
1. Do not clean or replace the filter
during charging. Remove the adap-
ter from the wall socket.
2. Remove the tube from the vacuum
cleaner.
3. Remove the waste from the dust
container (see "Removing waste
from the dust container").
4. Remove the dust container from
the vacuum cleaner by pressing
the release button (see figure 7A)
and taking out the dust container
(figure 7B).
5. Turn the upper lid and remove it
from the dust container (figure 7C).
6. Take the dust separation system
and filter from the dust separation system (figure 7D).
7. Rinse the filter and the dust separation system thoroughly in lukewarm water.
8. Allow the filter to dry thoroughly.
9. Mount the holders and filters in the reverse sequence.
A
E
D
29
B
A
B
C
EN
6
7