Inhoudsopgave
Advertenties
1. Powerful cordless hand-held vacuum cleaner for about 30 minutes of continuous operation.
2. Click the tube (10) or one of the included brush tools into the tube connection (1) (see figure 2A). When
using the tube, subsequently click one of the included brush tools into the end of the tube. To remove an
accessory, push the button (1) at the top of the tube connection (see figure 2B) and pull it out.
3. Press the on/off switch (3) and start vacuum cleaning.
4. Press the on/off switch again to activate the Power-Turbo function.
5. Press the on/off switch again to turn off the appliance.
ACCESSORIES
This vacuum cleaner is supplied with four brush tools (see figure 3 and 4):
•
a motor driven turbo nozzl (9) for
optimum suction performance on hard
floors and carpet;
•
a combined tool with a large brush (12)
for cleaning delicate or irregular surfaces
and a furniture suction nozzle (13) for
furniture, Venetian blinds, and similar;
•
a combined tool with a small brush (14) and
a crevice tool (15) with a narrow nozzle,
for cleaning radiators, window frames,
crevices, small openings, and similar.
OPERATION - Storage after use
This vacuum cleaner is supplied with a wall
mount (16), which can be attached to the wall
using two screws. Place the vacuum cleaner
and the accessories onto the wall mount to
store them neatly in a fixed place (figure 4).
CLEANING
AND
MAINTENANCE
Removing waste from the dust container
1. Do not empty the dust container during charging. Remove the adapter from the wall socket.
2. Remove the tube from the vacuum cleaner.
3. Hold the vacuum cleaner above a waste-bin.
4. Press the button (7) to open the bottom flap (8) (see figure 5).
5. If so required, use your hand to remove any waste sticking to the container.
6. Close the bottom flap, and press until it clicks into place.
A
-
B
28
3
C
EN
4
5
Advertenties
Inhoudsopgave
