Inhoudsopgave
Advertenties
5 min.
Modules (power management)
Operation
4.22 Locking
The lock can be used to lock key operation and cooking
level settings. Only the ON/OFF key can be used to switch
the hob o .
Activating the lock
1. Press the lock key
The lock will now be activated.
Switching o the lock
2. Press the lock key
dimmed light.
The lock is now switched o .
Notes
An activated lock will remain activated even if the hob is
switched o . It must therefore be de-activated when cook-
ing is re-commenced.
The activated lock will be cancelled, i.e. de-activated, in
the event of a power failure and when the ON/OFF key is
used for switching o .
4.23 Power boost
The power boost setting makes additional power available
for induction cooking zones. A large quantity of water can
be brought to the boil very quickly.
1. Switch on the hob. Use the power setting display (as a
key) to select a cooking zone. The stand-by dot of the
cooking zone selected will light up.
2. Press the
power boost setting will be activated.
3. After 5 minutes the power boost setting will switch o
automatically. The
switch down to 9.
Please note
Press the sensor fi eld to prematurely de-activate the pow-
er boost.
4.24 Power management
For technical reasons two cooking zones always comprise
a module and have a maximum power level.
If this power range is exceeded when a higher power
setting level or the power boost function is switched on the
power management system will reduce the power setting
of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after
which the highest-possible power setting will be consis-
tently displayed.
. The lock key will light up brightly.
. The lock key will light up with a
sensor fi eld on the far right. The
will go o and the power level will
GB
37
Advertenties
Hoofdstukken
Inhoudsopgave
