Inhoudsopgave
Advertenties
your fixings are correctly located,
by temporarily fitting the cooker
hood. If correct, fit the appliance
into position. Tighten the screws if
necessary.
Wall mounting installation
•
To mount on the wall, drill two 10mm diameter holes 538mm apart with the
vent hole on the top of the cooker hood in the middle as shown below. Make
sure the hood is aligned directly over the hob.
•
Insert two wall plugs(supplied) into the holes.
•
Insert two screws into the upper two wall plugs and tighten them leaving
3mm protruding from the wall.
•
Mount the cooker hood onto the two screws and mark the bottom two screw
positions.
•
Remove the hood and drill the
bottom two screw holes and Insert
the wall plugs.
•
Mount the hood on the top screws.
Insert the bottom screws and fully
tighten all the screws.
54
PVH62BWH_PVH62BSL_IB.indd 54
PVH62BWH_PVH62BSL_IB.indd 54
FR
NL
Unit: mm
EN
PT
3/5/2024 11:09 AM
3/5/2024 11:09 AM
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
