Bestway 58497 Gebruikershandleiding pagina 5
Verberg thumbnails
Zie ook voor 58497:
- Gebruiksaanwijzing (12 pagina's) ,
- Gebruiksaanwijzingen (49 pagina's) ,
- Gebruikershandleiding (173 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assembly (You will need a screwdriver.)
1. Carefully remove all components from the package and check to
ensure nothing is damaged. If equipment is damaged,immediately
notify the retailer from where the equipment was purchased.
2. The sand filter should be placed on solid, level ground, preferably
a concrete slab. Position the sand filter so the Ports and Control
Valve are accessible for operation, servicing and winterizing.
3. EN60335-2-41 TEST standard requires the sand filter to be
vertically fixed on ground or a certain pedestal made of wood or
concrete before use to prevent the sand filter from accidentally
falling. Fully assembled sand filter will exceed 18kg. The mounting holes should be 8mm in
diameter and spaced 86 mm apart. Use two bolts and nuts with a maximum of 8mm in
diameter to fasten the sand filter to the pedestal.
Load pool-grade filter sand/Flowclear
NOTE: Use only special pool-grade filter sand, free of all limestone or clay: #20 Silica sand
0.45-0.85mm, approximately one 36kg bag should suffice. If you do not use the
recommended size filter sand, filtering performance will be reduced and the sand filter may
damaged, thereby voiding warranty.
NOTE: To avoid damaging the Skimmer when adding sand, pour some water into the Bottom
Tank to submerse the Skimmer on the Collector Hub.
NOTE: Sand/Flowclear
NOTE: Use 28 g (0.06 lbs) Flowclear
Connect to the pool
1
S-S-006172/21.0x28.5cm/58497GS/1500gal 德规砂滤器说明书/JS-YF-2017-B-03784/英
™
Polysphere not included.
™
Polysphere to replace 1 kg (2.20 lbs) sand.
™
C
A
B
A
A
A
B
B
B
Polysphere.
4
5
86mm
Ф8mm
MAX.
MIN .
MAX
MIN
C
C
Advertenties
Inhoudsopgave
