Inhoudsopgave
Advertenties
NOTE: You could also charge your conventional USB
devices from the USB Type A output port
using the included USB cable
USB cable (not included).
To charge your USB Power Delivery (PD) enabled device,
connect the USB Type C plugs of your USB Type C to Type
C cable (not included) to the PD port
and the PD port of the device to be charged. The charging
process will start automatically. When a PD enabled device
is charged at the Type C port, the fourth LED of the battery
capacity indicator lights up green.
In case if the charging process does not begin immediately,
press the ON / OFF button
process. The current battery status of the power bank
displayed during the charging process by the LED indicator
for battery capacity
To end the charging process, disconnect the USB charging
cable from the mobile device and the power bank
power bank will switch OFF after approx. 30 seconds.
Or simply double click with ON / OFF button
power bank and the LED indicator for battery capacity
will switch off.
NOTE:
1. If you use all the USB ports, a voltage of 5 V will output at
the outputs. The maximum output current must not exceed
3.0 A for all outputs. If all USB outputs are used, fast charge
is not possible.
2. If USB type A output
or PD mode, and another USB port is connected to another
device for charging, the quick charge mode or PD mode
GB/IE/NI 16
4
or a USB Type A to micro
6
briefly to begin the charging
7
.
2
or PD port
of the power bank
2
of the power bank
1
. The
6
1
is in quick charge
3
is
. The
3
7
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
