Inhoudsopgave
Advertenties
ENGLISH
Electrical installation for two or more units in master/slave:
In this mode the units will show a synchronized show, working to the rhythm of the beat.
• Connect 2 to maximum 16 units together using good quality balanced microphone cables. The first unit
in the chain will automatically act as the master, the other units will act automatically as slaves.
• Make sure that all units are connected to the mains.
• Done!
Remark: if there's no output, please make sure to set the option [No DMX] of the projector to [SOUND]
(audio mode) and sound sensitivity [Sound] to a value over 50 (see previous chapter).
Electrical installation for two or more units in SMART-MSL:
In this mode the units will show a synchronized show, working to the rhythm of the beat but you can still
control some functions on the master using only 5 DMX-channels.
• To assure proper operation you need an optional "Mini DMX-SPLITTER" to isolate the master/slave line
from the main DMX-line, see drawing.
• Connect 2 to maximum 16 units together using good quality balanced microphone cables. The first unit in
the chain will act as the master, the other units will act automatically as slaves.
• Set the master to 5MSL (SMART-MSL) channel mode (see previous chapter).
• For the DMX-controller the master and its slaves can now be considered as 1 virtual effect that needs a
start address so it can be controlled as any other DMX-unit in the DMX chain: see "DMX Address" in the
chapter "Main Menu" to see how you can set the DMX-start address.
• Make sure that all units are connected to the mains.
• Set the DMX-controller according to the DMX-chart below.
• Done!
Remark: in order to work well to the rhythm of the music, make sure to set the [No DMX] mode of the
MASTER projector to [SOUND] and sound sensitivity [Sound] to a value over 50 (see previous chapter).
DMX-Chart for 5MSL (SMART-MSL) working mode
1 – DIM
VALUE FUNCTION VALUE
255
100%
10
9
8
7
6
5
4
3
008
0%
2
000-007
STANDBY
1
Electrical installation in DMX-mode:
• The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
"daisy chain" your DMX controller and all the connected units with a good quality balanced cable.
• Both XLR-3pin and XLR-5pin connectors are used, however XLR-3pin is more popular because these
cables are compatible with balanced audio cables.
BRITEQ
®
2 - STROBE
FUNCTION
VALUE
255
FAST STROBE
218-255
188-217
158-187
128-157
098-127
068
SLOW STROBE
068-097
038-067
SOUND STROBE
038-067
008-037 RANDOM STROBE 008-037
000-007
OPEN
000-007
3 - COLOR
4 - GOBO
FUNCTION
VALUE
ORIGINAL
218-255 ORIGINAL GOBOS
COLORS
COLOR 7
188-217
COLOR 6
158-187
COLOR 5
128-157
COLOR 4
098-127
COLOR 3
068-097
COLOR 2
038-067
COLOR 1
008-037
WHITE
000-007
10/74
USER MANUAL
5 - PAN/TILT SPEED
FUNCTION
VALUE
255
GOBO 7
GOBO 6
GOBO 5
GOBO 4
AUDIO TRIGGERED
GOBO 3
GOBO 2
GOBO 1
008
AUDIO VERY SLOW
NO GOBO
000-007
HOLD (FREEZE)
BT-METEOR
FUNCTION
AUDIO FAST
RANDOM
PROGRAM
Advertenties
Inhoudsopgave
