Inhoudsopgave
Advertenties
2.
Bouncer base
3.
Toy bar holder
4.
Connecting elements of the frame
5.
Metal snap buttons
6.
Safety harness
7.
Toy bar
Assembly and use
1.
Put the connecting elements of the frame (4, fig. A) into the bouncer base
(fig. 1). Make sure they are inserted properly.
2.
Fasten the metal snap buttons in the lower part of the covering to connect
the covering with the bouncer base (fig. 2).
3.
Insert the toy bar into the opening in the toy bar holder (3, fig. A). Correct
installation will be indicated by a "click" sound. To remove the toy bar, press
its end inside the holder and then pull.
4.
Fasten the safety harness buckles. To unfasten the harness, press the
buttons located on the sides of each buckle (fig. 3).
5.
Adjust the length of the safety harness straps to fit the size of the child's
body (fig. 4).
To disassemble the bouncer, follow the instructions above in the reverse order.
Cleaning and maintenance
•
Small stains on the covering should be cleaned with a wet cloth and a mild
detergent.
•
Covering can be removed and handwashed at temperature up to 30°C and
with a mild laundry detergent.
•
Do not use bleach or other strong cleaning agents.
•
Do not machine wash and tumble dry.
•
Wet covering should be laid out and left to dry fully.
•
Frame and plastic elements should be cleaned with a wet cloth and a mild
detergent. Before each use, frame and plastic elements should be wiped dry.
•
Store the product in a dry place and keep it away from high temperatures
and moisture.
EN
‑ 6 ‑
Advertenties
Inhoudsopgave
