Inhoudsopgave
Advertenties
Assembly the front handle
1)
Press the button and insert the front handle.
2)
Turn the handle to the desired angle while holding down the button. Release the button and make sure
that the handle engages in a locked position.
18. Switchinng On/Off the device
Insert the batteries into the rails provided.
Attention: the appliance is now ready for operation.
To switch on/off, turn the control dial (see Figure 1, point 2). This can also be used to set the
blowing/suction speed. We recommend that you start your work with a lower power setting and only
increase the power if necessary. Lowering the power will reduce the noise level and extend the
battery life
19. Maintenance and care
Warning: before carrying out any work on the power tool, remove the battery from the device.
- Clean the leaf blower after each use with a dry cloth or with a brush if it is very dirty.
- Never spray the leaf blower with water.
- Keep the contacts of the battery and the device clean and dust-free.
Manual_FX-E2LBS_Int24_rev1
Do not use water or liquid cleaning agents.
32
Advertenties
Hoofdstukken
Inhoudsopgave
