Inhoudsopgave
Advertenties
Minor, irrelevant problems can often arise. We therefore ask you to first consult the table below before
contacting qualified customer service.
Error codes
Problems/bugs
Code "E2"
(drain)
Code "E3"
(Run over)
Code "E4" (Temperature)
Code "ES" (flushing process)
Code "E6" (heating up)
Code "E7" (pressure)
Problems (1)
Problems/bugs
The dishes are wet after
washing.
Plastic parts are discolored
after the rinse cycle.
The "salt" symbol flashes.
Detergent left
40
Troubleshooting
Possible Cause
Check that the drain pipe is straight and has no
kinks.
Turn off the power to the machine. Check if
the filter or drain pipe is blocked by food
particles.
Tilt the machine 30-45 degrees, drain the
water from the bottom of the machine and
restart the machine, if the error persists,
Restart the device. If the error persists, please
Possible Cause
Wrong program selected.
Poor drying effect on
plastic parts.
Incorrect sorting of
dishes.
drying program was
not finish.
Temperature set too high.
Lack of salt in the
machine
Salt was not completely
dissolved
Clogged spray arm, no
water flush possible
contact our customer service.
contact our service technician.
Fix problem
Choose the right program.
Hand wipe to dry.
Arrange the dishes as described
in this user manual.
Wait for the drying program to
finish.
Select a low temperature
program.
Fill up the dishwasher salt.
Wait until all the salt has
dissolved.
Check that the spray arm moves
smoothly and that nothing is
blocked.
Advertenties
Hoofdstukken
Inhoudsopgave
