Inhoudsopgave
Advertenties
02 CD Clock Discalo CCD 6300,GB
31.03.2003
SETTINGS
______________________________________________
Setting the clock
When the device is switched on for the first time, »0 : =0« appears in the dis-
play to indicate that the time must be set. The same applies if the device has
been disconnected from the mains and no back-up battery is inserted.
1
Set the sliding switches for the alarm
e2 OFF ON ADJ
and »
2
SET« and hold it down.
Press
»TIME
– Display: the time flashes.
3
I
Press
»SKIP
« briefly to set the hours step-by-step or hold it down
4
to run through the minutes quickly.
4
I
SKIP« briefly to set the minutes step-by-step or hold it
Press »
3
down to run through the minutes quickly.
Note:
When the minute display changes from »59« to »
affect the hour display.
5
SET« to conclude the setting.
Release
»TIME
– Display: the current time.
Setting the alarm times
With this device you can set two alarm times.
1
»e1 OFF ON
Set the sliding switch
»ADJ«.
– Display: the last alarm time set flashes.
2
I
Press
»SKIP
« (top of the device) briefly to set the hours
4
step-by-step or hold down to run through the hours continuously.
3
I
SKIP
Press »
« (top of the device) briefly to set the minutes
3
step-by-step or hold down to run through the hours continuously.
4
To end the setting set the sliding switch »
left side of the device) to »ON«.
– Display: the LED
»e1
time 1 is activated.
5
To set alarm time 2, repeat steps
»e2 OFF ON
ADJ« (left side of the device).
– Display: the LED
»e2
time 2 is set.
12:52 Uhr
Seite 27
function»e1 OFF ON
OFF«.
« to »
00
ADJ« (left side of the device) to
e1 OFF ON ADJ
•
« glows, i.e. the alarm setting with alarm
1
4
to
with the sliding switch
•
« glows, i.e. the alarm setting with alarm
ADJ«
«, this does not
« (on the
Advertenties
Inhoudsopgave
