Inhoudsopgave
Advertenties
02 CD Clock Discalo CCD 6300,GB
31.03.2003
OPERATION
General functions
Switching on and off
1
Press »ON/OFF« to switch on the device from standby mode.
•
ON
– The »
« LED glows.
2
Press »ON/OFF« to switch the device to standby mode.
•
– The
»ON
« LED goes out.
Selecting the input source
1
Select the input source with
the device).
Adjusting the volume
1
Adjust the volume with »
Listening with headphones
1
Connect the headphones to the »
device).
– This automatically switches off the loudspeakers.
Radio operation
For the best FM (VHF) reception, it is sufficient to direct the wire antenna.
The radio has a built-in rod antenna for MW reception. Turn the device aro-
und to direct the antenna.
Selecting the radio input source
1
»CD MW FM FM
Set the sliding switch
device) to »MW«, »FM« or
Tuning radio stations
1
Select the frequency band (FM or MW) with
STEREO« (right side of the device).
2
Set the desired radio station with » TUNING« (right side of the device).
Stereo/mono reception
CD MW FM FM STEREO
If the sliding switch »
FM STEREO
device) is set to »
»FM STEREO
this is the case, the
from the FM stereo station is weak, you can improve the sound quality by
switching to mono reception.
1
»CD MW FM FM
Use the sliding switch
device) to switch from »
•
FM STEREO
– The »
2
»CD MW FM FM
Use the sliding switch
of the device) to switch from »
12:52 Uhr
Seite 28
__________________________________________
»CD MW FM FM
STEREO« (right side of
|
VOLUME
« (right side of the device).
0
« socket (ø 3.5 mm) (left side of the
STEREO« (right side of the
STEREO«.
»FM
« (on the right side of the
«, the device can receive FM stereo stations. If
•
« LED glows. However, if the signal
STEREO« (right side of the
FM STEREO
FM«, i.e. mono.
« to »
« LED goes out.
STEREO« (on the right side
FM
FM
STEREO«, i.e. stereo.
« to »
»CD MW FM FM
Advertenties
Inhoudsopgave
