Advertenties
3.6 Residual Risk
Even when all safety rules are observed, when operating the product a
residual risk remains, as described below.
All persons working on and with the product must be aware of these
residual risks and follow the instructions that prevent these residual risks
from causing accidents or damages.
WARNING
Danger of serious injury to the lungs and respiratory tract – always wear
respiratory protection, Class FFP2 or higher.
Skin contact with welding fume particles may cause skin irritation in
sensitive persons – wear protective clothing.
Before starting the welding process, ensure that the product is properly
adjusted and in operation. The filter elements must be complete and in
undamaged condition.
The connected detection element must reliably detect the welding
fumes. For the correct positioning, refer to the documentation of the
detection element.
When changing the filter inserts, skin contact with the separated dust
particles may occur and parts of the dust particles may also be stirred up
by the work. Respiratory protection and protective clothing must be
worn.
Embers in the filter elements may cause smouldering fires – switch off
the product, close the damper flap in the collection element if fitted and
let the device cool down in a controlled manner.
1502937-00
- 59 -
EN
Advertenties
