Inhoudsopgave
Advertenties
13. Spare-part ordering
Please quote the following in your order for spare
parts:
• Type of device
• Article No. of deviceIdent. No. of device
• Spare Part No. of the required spare part
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
Wear parts*: Brush Assemblies, Blade Roller
* Not necessarily included in the scope of delivery!
Spare parts and accessories can be obtained from
our service centre. To do this, scan the QR code on
the cover page.
14. Troubleshooting guide
Fault
Possible causes
Motor does not start
• No electricity in plug
• Cable defective
• Switch, switch/plug block defective
• Connections to motor or capacitor
disconnected
• Blade roller blocked
Engine performance
• Soil is too firm
drops
• Carbonbrushes worn out
• Roller badly worn
The Electric Tiller is
• roller worn
difficult to check.
• Wrong working depth
Motor is running, roller
• Gearing defective
is not rotating
28 | GB
Rectification
• Check line and fuse
• Have machine checked by a customer service
center
• Have machine checked by a customer service
center
• Have machine checked by a customer service
center
• If necessary adjust working depth. Clean housing
so that the roller can run freely
• Change working depth
• Check by a customer service center
• Replace roller
• Replace roller
• Correct working depth
• By customer service workshop
www.scheppach.com
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
