Inhoudsopgave
Advertenties
3 Safety Precautions
► Insert the power adapter in a properly installed and
fused wall outlet.
► Install the power supply with a fault current circuit
breaker (30 mA, 30 ms).
WARNING
￭ Overvoltage can occur in the power adapter if the line
voltage or frequency are incorrect during operation. The
power supply may be damaged.
► Make sure that the mains voltage and the mains
frequency of the power supply or the voltage
transformer in a vehicle match the data on the rating
plate of the power adapter.
￭ If the STIHL connected Hub is connected to a power strip,
electrical components may be overloaded during use. The
electrical components may overheat and cause a fire.
Persons may be seriously or fatally injured, and property
may be damaged.
► Ensure that the technical specifications for the STIHL
connected Hub are not exceeded by the information on
the rating plate of the power supply and of all electrical
devices connected to the power strip.
￭ A carelessly laid cable may be damaged and cause others
to trip or fall. People may be injured and the STIHL
connected Hub or power adapter may be damaged.
► Position and mark cables so they do not represent a trip
hazard.
► Route the cable so that it will not be damaged, kinked or
crushed, or chafed.
0458-199-9921-A
￭ If wiring and pipes are laid in the wall, they may be
damaged if the STIHL connected Hub is mounted on the
wall. Contact with wiring can result in electric shock. This
may result in serious injury to people and damage to
property.
► Make sure there is no wiring or pipes in the wall at the
proposed mounting site.
￭ If the STIHL connected Hub is not mounted on the wall as
described in this User Manual, the STIHL connected Hub
may move, fall down, or overheat. Persons may be injured
or property may be damaged.
► Mount the STIHL connected Hub on the wall as
described in this User Manual.
￭ If the STIHL connected Hub has not been professionally
installed in the vehicle, vehicle components may be
damaged. Persons may be injured or property may be
damaged.
► Observe the vehicle manufacturer's mounting
instructions.
► Applicable national installation regulations must be
observed when connecting the charger to the vehicle
supply system.
3.6
Cleaning, Maintenance and Repair
WARNING
￭ There is a risk of an electric shock if the power adapter is
not removed from the wall outlet during cleaning,
maintenance or repair operations. This may result in
serious injury to people and damage to property.
► Disconnect the power adapter from the power supply.
￭ Aggressive cleaning agents, cleaning with a jet of water or
pointed objects can damage the STIHL connected Hub or
the power adapter. If the STIHL connected Hub or the
power adapter are not cleaned correctly, components may
English
15
Advertenties
Hoofdstukken
Inhoudsopgave
