Inhoudsopgave
Advertenties
CAUTION: To prevent this unit falling into water, do not install it above or alongside your pond. Do not make the
electrical connection to your unit until it has been plumbed in and fixed securely.
If the unit is to be mounted on a flat surface, the final positioning of the hosetails will dictate how to achieve this.
It may be necessary to raise the unit to avoid interference between the hosetails and the flat surface, which is best
achieved by using bricks or blocks firmly positioned under the feet of the unit.
CAUTION: To prevent this unit falling into water, do not install it above or alongside your pond.
• The unit may be mounted horizontally onto a vertical wall using the mounting brackets included (see diagram
below).
• The 8 screws provided are suitable for fixing the brackets to a wooden surface. You should ensure that the unit is
the correct way round with the wall spacers positioned at the back of the unit.
• Mark the wall through the brackets then fix with (8) 1" No.8 screws
• Please note that there is no correct flow direction through the unit. Either end of the unit may be used as the inlet
or outlet. Hosetails should be tightened using hand pressure only.
• Ensure that the "O" rings are in position before assembling.
• Do not use jointing compound or PTFE tape.
WALL BRACKETS
MOUNTING ON A HORIZONTAL SURFACE
MOUNTING ON A VERTICAL WALL
9
WALL BRACKETS
VERTICAL WALL/FENCE
Advertenties
Inhoudsopgave
