Inhoudsopgave
Advertenties
2. Loosen the height adjustment ring, lift the internal
pole to the max height and prevent the internal pole
from slipping into the extension pole, then unscrew the
height adjustment ring. (Fig.2)
3. To attach the stand cover, slide the stand cover
down the extension pole. (Fig.3)
4. Reattach the height adjustment ring. (Fig.4)
5. Loosen the height adjustment ring from the
extension pole, and adjust the internal pole to the
desired height. (Note: The internal pole is inside the
extension pole. You can pull it out from the extension
pole.) (Fig.5)
6. To attach the head unit to the internal pole, loosen
the thumb screw on the bottom of the head unit.
Place the head unit on the internal pole and tighten
the thumb screw in alignment with the groove on the
internal pole. (Fig.6)
7. Unscrew the spinner clockwise (or take the spinner
out of the bag) and tighten the nut counterclockwise to
remove them both. Attach the rear protective guard to
the motor housing and tighten the nut. (Fig. 7)
8. Insert the fan blade on the motor fan shaft, and to
ensure that the spindle is mounted in the groove of the
fan blade. Turn the spinner counterclockwise to tighten
the fan blade. (Fig. 8)
9. Attach the front protective guard and rear protective
guard with grid clamp and attach the guard by
tightening nuts and bolts. (Fig. 9)
Fig.1
Fig.2
Four screws
Fig.4
Fig.5
Fig.7
Fig.8
ENG
Fig.3
Loosen
Fig.6
Thumb screw
Fig.9
5
Advertenties
Inhoudsopgave
