Inhoudsopgave
Advertenties
Installation and electrical connection
2. Designated use
The motor types SP must only be used for operating roller shutters, awnings and (zip-)
screens.
3. Installation and electrical connection
3.1. Installation of the motor into a shaft
1. Attach crown and coupling adapter to the motor and fasten them with the locking device.
2. Push the motor into the shaft in a positive-locking way. The motor must not be subject to
any impacts. Crown and coupling adapters must not have any play inside the shaft.
3. Where required, secure the motor axially, e.g. by screwing the shaft to the coupling adapt-
er. Do not drill holes into the motor area!
4. Attach the shaft with the motor and the shaft cap in the bearings. Do not bend the motor
cable and place it so that it cannot be damaged. To keep water from getting into the motor,
place the motor line in a bend direction downwards, so that any water can drip off.
5. Attach the curtain to the shaft.
3.2. Supporting the motors
In general, SELVE motors can be supported by means of an inserted square or by means of
the external contour of the motor head. There are different motor brackets for all support
options.
Furthermore, different flanges or mounting plates can be pre-screwed. In case of square
support, there must be a mechanical stop behind the motor bearing, in order to avoid axial
movement of the square.
18
Advertenties
Hoofdstukken
Inhoudsopgave
