Inhoudsopgave
Advertenties
64
EUROPORT MPA200BT
Specifications
MPA200BT
Amplifier
Maximum output power
Type
Loudspeaker / System Data
Woofer
Tweeter
Frequency response
Audio Inputs
Input type
Input impedance (XLR)
Input impedance (¼" TRS)
Max. input level
Max. MP3 input level
Digital Signal Processor (DSP)
Display
DSP panel controls
Input trim
Bluetooth control
MP3 level control
Main level control
Audio optimization
Bass
Mid
Treble
Wireless System
USB dongle
Signal indicator LED
Bluetooth / MP3**
Frequency range
Channel number
Version
Max. output power
Compatibility
Battery Supply
Built-in rechargeable Lead-acid battery
Charging time
Battery operating time ***
AC Power Supply
Type
Mains voltage
Power consumption @ 1/8 max power
Mains connection
Dimension / Weight
Dimensions (H x W x D)
Weight
*Independent of limiters and driver protection circuits.
**The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Music Tribe is under license.
***Depending on the output power.
200 W*
Class-D
8"
1"
70 Hz to 20 kHz (±3 dB)
2 x XLR / ¼" TRS combo jacks (servo-balanced)
2 kΩ, balanced / 20 kΩ, unbalanced
1 MΩ, unbalanced
-9 dBu balanced / +15 dBu unbalanced (XLR / ¼" TRS)
+10 dBu (stereo)
LCD 128 x 32, amber backlit
Rotary Push Encoder
Buttons for Process, Setup, Exit and Enter
-∞ to + 10 dB
-∞ to 0 dB
-∞ to + 10 dB
-∞ to + 10 dB
Music, Live, Speech and Club modes
-10 dB to + 10 dB @ 80 Hz, Shelving
-10 dB to + 10 dB @ 2 kHz, Parametric, Q = 0.5
-10 dB to +10 dB @ 12 kHz, Shelving
USB socket accepts signals from ULM300USB
2 (green)
2400 MHz ~ 2483.5 MHz
79
Bluetooth spec 4.0 compliant
≤10 dBm
Supports GATT, A2DP 1.2 profiles
12 V DC / 12 Ah
appr. 8-10 hours
up to 20 hours
Switch-mode autorange power supply
100-240 V, 50/60 Hz
100 W
Standard IEC receptacle
420 x 280 x 257 mm (16.5 x 11.0 x 10.1")
12.1 kg (26.6 lbs)
ULM300USB
RF output
Operating range
Dynamic range
Equivalent input noise
Frequency response
Sampling rate
Resolution
Encoding
Latency
RF frequency
USB current consumption
Battery type
Battery life
Dimensions (H x W x D)
Microphone
Wireless receiver
Weight
Microphone
Wireless receiver
*Achievable range will be dependent on nearby sources of RF interference and/or line of sight obstacles.
**Measured from analog input to analog output at maximum level.
WARNING
• •
As with all small batteries, the batteries used with this product should be kept away from small children who still put things in their mouths. If they are swallowed,
promptly call your local poison control center.
• •
Always purchase the correct size and grade of battery most suitable for intended use.
• •
Replace all batteries of a set at the same time.
• •
Clean the battery contacts and also those of the device prior to battery installation.
• •
Ensure the batteries are installed correctly with the regard to polarity (+ and -).
• •
Always remove battery if consumed or if product is to be left unused for a long time.
• •
Replacement of a battery with an incorrect type that can defeat a safeguard! Replace only with the same or equivalent type!
• •
Risk of fire or explosion if the battery is replaced by an incorrect type.
• •
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• •
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion
or the leakage of flammable liquid or gas; and
• •
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• •
Attention should be drawn to the environmental aspects of battery disposal .
Quick Start Guide
< 10 dBm (10 mW)
60 m (200 ft)*
93 dB, A-weighted**
-120 dBu
10 Hz – 20 kHz, ±1 dB**
(wireless link)
48 kHz
24-bit
4-bit ADPCM (192 kbps)
14.3 ms
2.4 GHz ISM band
(2.404~2.468 GHz, 17 channels)
70 mA @ 5 VDC
2 x AA (LR6) Alkaline cells
> 24 hrs
260 x 53 x 53 mm (10.2 x 2.1 x 2.1")
8.5 x 76 x 22 mm (0.3 x 3.0 x 0.9")
0.3 kg (0.7 lbs)
0.01 kg (0.02 lbs)
65
Advertenties
Inhoudsopgave
