Inhoudsopgave
Advertenties
18
h
LED
lights up.
● Place a container with a capacity of at
least 0.5 litres under the milk frother
outlet (6).
● Pull out the milk frother (6) to open it.
The service programme will now run for
approximately 12 minutes.
D
LED
lights up.
● Rinse the water tank (16) and refill it with
fresh water up to the max mark.
● Press the start button (10).
The service programme will now run for
approximately 30 seconds and rinse the
appliance.
h
LED
lights up.
● Push the milk frother (6) in to close it.
The service programme will now run for
approximately 8 minutes.
H
LED
lights up.
● Empty the drip tray (8) and reinsert it.
If you are using a filter, reinsert it now.
The appliance has been cleaned, descaled
and is ready for use again.
Robert Bosch Hausgeräte GmbH
TES501_Heft1_RW.indb 18
All manuals and user guides at all-guides.com
Frost protection
¡
Information: The appliance must be ready
for use and the water tank (16) filled.
1. Place a large container under the milk
2. Press the steam button (11).
3. If LED
4. Press the power on/off switch O / I (9) to
5. Empty the water tank (16) and the drip
Accessories
The following accessories are available
from retailers or from customer service:
¡
To avoid damage caused by frost
during transport and storage, the ap-
pliance must be completely emptied
first.
frother outlet (6).
h
LED
flashes and the appliance now
heats up for approximately 20 seconds.
h
lights up, open the milk frother
(6) by pulling it out and release steam
for about 15 seconds.
switch off the appliance.
tray (8).
Order number
Retailer
Cleaning
TCZ6001
tablets
Descaling
TCZ6002
tablets
Water filter
TCZ7003
Grease (tube)
–
en
Customer
service
310575
310967
467873
311368
14.09.2011 16:10:31
Advertenties
Hoofdstukken
Inhoudsopgave
