Inhoudsopgave
Advertenties
CHARGING THE BATTERY
Charging via the transmitter
• Switch the RC unit to "ON"
• Open the charging slot in the middle of
the RC unit
• Connect the charging cable to the
charging socket on the boat (make sure
the plug is correctly fitted)
• While chargiong, the green status LED
will light
• green LED goes out - charging is com-
plete (charging time 10-12 min.)
INSTALLING THE TRANSMITTER BATTERIES
1. Turn to open the battery compartment
out there the attached screw counter-
clockwise with a screwdriver.
2. Insert a fresh battery according to
the polarity of prefabricated into the
battery compartment.
3. Close the battery compartment cover
and turn the screw clockwise again
prudently.
4. Slide the switch on the rear panel to
„ON". Lighting up a LED light indicates
that the batteries are inserted correctly.
Caution !!!
When delivered, the batteries are already in the remote control.
Please remove the protection paper strip only!!!
INSTALL THE TRANSMITTER ANTENNA
GB // 10
1
Model charging
lead
2
Advertenties
Inhoudsopgave
